|Piece Cable Tie with fixing element, with Arrowhead and Disc|
Piece Cable Tie with fixing element, with Arrowhead and Disc
A simple one-piece bundling and fixing cable tie with an arrowhead mount. When inserted into the hole the arrowhead locks into place and the 'disc', between the fixing and the head of the cable tie, covers the hole and minimises the ingress of dust, dirt and water, whilst adjusting for variations in panel thickness thereby ensuring a secure fixing at all times.
With a diverse range of fixing possibilities this range of cable ties with fixing elements is ideal for use in many different industries, for example:
automotive, aerospace, white goods manufacture and panel building.
Pieces Cable Ties with fixing elements with Arrowhead, with Disc
PEEK cable ties with fixing elements are the combination of proven design and modern raw material.
The two piece design of cable tie and foot part enables the head of the tie to be oriented to the required position to ease the assembly, whilst the arrowhead base will easily push into pre-punched holes for a tight fixing. Additionally the footparts made of PEEK withstand temperatures from -55°C up to +240°C. Their chemical resistance, even against acid and gamma radiation is excellent.
These cable ties with fixing elements P1SFT6,5 and P2SFT6,5
are ideal when the requirements for temperature or chemical resistance are
very high. This cable tie series is used for cable harnesses in the automotive industry.
Piece Cable Ties with Fir Tree, with Disc
The one-piece cable tie and fixing offers a simple and easy to use method of bundling and fixing cables, the design of the fir tree ensures a positive and secure fixing into panels with thicknesses from 0.8mm to 7.0mm or threaded blind holes.
The 'disc' on the top of the fir tree covers the hole and minimises the ingress of water and dirt.
This one-piece cable tie was primarily designed for fixing cable harnesses in the automotive industry their simplicity, and ease of use, has seen these parts used in everything from aircraft, to switch-gear, to washing machines.
Piece Cable ties with EdgeClip
These cable ties with edge clips are ideal for use where holes are not acceptable or where due to temperature problems adhesives will fail. Once the cable tie is fastened around the cables the edge clip is presented ready for attaching to the panel.
Simply pushed onto edges with thicknesses from 1.0mm to 3.0mm, they offer a very secure and simple fixing method.
Widely used within the automotive and panel building industries these cable ties and edge clips save time and money.
|【Previous】·Cable ties tailored to your applications!|